Pansol — the steel formwork brand of Shandong Panshi Heavy Industry Machinery Co., Ltd. — supplied a high-strength steel formwork system for the Adelaida Meadow Residences, a two-storey residential villa project in the Philippines, working with a local construction company. The assignment was straightforward: provide a formwork package that fits the building’s structure and is simple for the local crew to assemble. Commercially sensitive client and site details have been withheld.
Low-rise housing remains one of the most active segments across Southeast Asia, and local builders are steadily moving away from formwork that has to be measured, cut and adjusted on site. This case study looks at what the project involved, the common problems the team faced, and how the Pansol system addressed them.
| Project | Adelaida Meadow Residences |
| Location | Philippines |
| Building type | Two-storey low-rise residential villa |
| Scope | Full steel formwork system for walls, columns and slabs, with walers and fittings |
| Material system | Q1180 panels · Q700 walers · Q235 fittings |
| Design approach | Modular BIM design, built directly to the project drawings |


The Challenges
Low-rise residential builds in the region run into a familiar set of problems, and this project faced the same ones:
- Keeping to schedule: conventional, labour-intensive formwork takes time to assemble and adjust on site, leaving little room for delay when milestones are tight.
- Hot, humid and rainy weather: ordinary formwork is prone to rust and deformation in tropical conditions, which shortens its working life and raises material loss.
- Consistent finish quality: imprecise or loose joints can cause grout leakage and uneven surfaces, creating rework and touch-up work later.
- Reliance on site skills: systems that depend on cutting and improvisation vary in quality depending on the crew, making results hard to predict.
How Pansol Solved Them
The package was built around a modular, drawing-based system rather than parts cut to fit on site. Each element of the design answers one of the challenges above:
- Modular BIM design: the system is designed in a modular model, with every component coded so the crew identifies each part and assembles it directly to the drawing. No on-site cutting is needed, and the work follows a clear, repeatable sequence.
- Graded high-strength steel: Q1180 panels, Q700 walers and Q235 fittings are matched to the load each part carries, covering the walls, columns and slabs together with the walers and connecting accessories.
- Anti-corrosion treatment: the finished panels are treated to withstand the hot and humid climate and hold up over repeated use.
- Precision-made joints: tight, consistent joints help prevent grout leakage and deliver a smoother finished wall with less rework.
Engineering Evidence: Built to the Project Drawings
The formwork layout and reinforcement nodes were produced against the project drawing set, so the assembly on site matches the documented design rather than an improvised arrangement. The two examples below show the waler and reinforcement nodes for the first and second floors.



Ongoing Technical Support
The relationship does not end at delivery. Pansol stays involved through the build and beyond:
- Installation guidance: support during the first assemblies so the crew starts with the correct sequence and alignment.
- Practical training: hands-on guidance that lets the crew handle the coded components confidently on their own.
- Responsive technical contact: a single point of contact for questions during the build, so issues are resolved quickly rather than slowing the work.
A Repeatable Model for Similar Projects
Because the approach is modular and drawing-based, the same system can be carried over to similar low-rise residential and small commercial projects, with only project-specific adjustments against each building’s structure. For builders working in hot and humid markets, the combination of coded components, graded high-strength steel and continued technical support offers a more predictable alternative to formwork that is cut and adapted on site.
Acerca de PANSOL
Pansol is the steel formwork brand of Shandong Panshi Heavy Industry Machinery Co., Ltd., serving overseas builders with modular, high-strength formwork systems and a dedicated technical service team.
Have a similar low-rise project? Talk to our team or email [email protected].
- Pansol Supplies High-Strength Steel Formwork for a Two-Storey Villa Project in the Philippines
- Pansol Steel Formwork Supplies Bridge Steel Formwork for Tanzania Standard Gauge Railway Project, Delivering One-Stop Export Service to East Africa
- Pansol Delivers Flat Steel Formwork for Tanzania Railway Project, Expanding Footprint in African Infrastructure
- Pansol Custom Hydraulic Climbing Formwork Powers Binzhou Yellow River Bridge: Safe, Precise, Efficient Steel Formwork Solutions
- Empowering Megaprojects | Pansol Standard Bridge Traveler by Pansol Heavy Industry Facilitates Efficient Construction of Jinan Yellow River Bridge

